What irrigation repair includes
Irrigation repair covers the whole system, not just the part that is obviously broken. We repair and replace heads and nozzles that are stuck, clogged or spraying the wrong pattern, fix or rebuild valves that are stuck open or will not open at all, trace and repair wiring faults between the controller and the valves, and diagnose or replace controllers that have stopped running a schedule correctly. Beyond the repair itself, every call includes a coverage audit: running each zone, watching how the water actually lands, and adjusting heads and run times so the lawn gets covered and the driveway, the street and the side of the house do not.
Seasonal checks are part of the same service. In spring we bring the system back online zone by zone, checking for winter cracks before they turn into a flooded yard. Late in the year we check it again before the first hard freeze, because a line that holds water through a freeze is the irrigation repair call we get every January.
Common signs a system needs a repair
Most irrigation problems show up as a pattern, not a single clear failure. A stuck head floods one corner of the yard while starving everything past it, which often looks like a drainage problem until someone checks the sprinkler. A cracked valve can run a zone all night, which shows up as a water bill that does not match the weather. Dead, brown or thin zones that do not track with sun or shade are usually a coverage gap rather than a feeding problem. A controller that resets itself, skips zones or will not hold a program is a wiring or controller issue, not something to work around by running the system manually.
- A head stuck up, spraying sideways, or not popping up at all
- One area constantly wet while the rest of the lawn stays dry
- A valve that runs for hours, or all night
- Dead or thin patches that do not match the sun pattern
- A controller that loses its schedule or will not hold a program

How irrigation repair fits with weekly lawn care
Our weekly lawn care service already includes a sprinkler check on the property walk every visit, the same irrigation and sprinkler repair work described on our lawn care page: we note a head that is not popping up, a zone that is running long, or a dead spot that looks like coverage rather than feeding. Routine seasonal checks, the spring startup and the pre-freeze shutdown, are part of that weekly service. An actual repair, replacing a valve, rebuilding a head, fixing a wiring fault or swapping a controller, is a separate job billed on its own, because parts and labor vary with what actually failed. If you are not already on weekly lawn care, we repair irrigation as a standalone service across Madison, Ridgeland, Brandon, Gluckstadt and Flowood.
Seasonal timing for Central Mississippi systems
Irrigation in Madison County runs on the same calendar as the warm-season lawns it waters. In spring, once the grass is greening up, we turn the system on zone by zone, check pressure at each valve, and reset run times for the season ahead. Through summer, we adjust for heat and rainfall so the system is not running during a downpour or underwatering during a dry stretch. Before the first hard freeze, usually late November in Central Mississippi, we check the backflow preventer and drain or blow out exposed lines, because a split pipe or a cracked backflow assembly from a hard freeze is the most common irrigation repair call of the new year.

Controllers, valves and why they fail here
Two things drive most of the irrigation failures we see locally: Yazoo clay and age. Clay shifts with wet and dry cycles, and that movement is hard on buried pipe joints and valve boxes over the years, which is why leaks and cracked valves show up more often in older systems than in new ones. Controllers fail for simpler reasons: age, a power surge, or a wiring fault from a nicked line during other yard work. We carry common heads, nozzles, valves and controller parts on the truck for most repairs, and for anything that needs a specific part, we tell you what it is and what it costs before we order it.
Commercial irrigation
Offices, HOA common areas and retail properties on our commercial routes get the same repair service on a scheduled basis, with monthly invoicing and a certificate of insurance on file. A dead zone at the entrance or a head spraying the parking lot is the kind of thing a property manager should not have to notice themselves.
What an irrigation repair estimate includes
We do not quote a repair over the phone from a description alone when we can help it. For most calls, a text or email photo of the head, the valve box or the controller display is enough to tell us what parts are likely needed and give a reasonable range before we ever come out. On site, we run every zone, note heads that need replacing, check valves for proper shutoff, test the controller's programming and backup power, and look at pressure at a few points in the system, because low pressure can mimic a dozen other problems and send a repair down the wrong path. The written estimate breaks out parts and labor separately, so a simple head swap is priced differently from a valve rebuild or a controller replacement, and you are not paying a flat service fee for a five-minute fix.
If the audit turns up more than the original call, for example one bad valve that turns out to be three, we tell you before we do the extra work, not after. And if a system is old enough that patching it piece by piece no longer makes sense, we will say that too, with a straight comparison of repair cost against a partial or full re-pipe, rather than letting a system limp along on repeated small repairs.
Questions we get
What does irrigation repair include?
Head, nozzle, valve, wiring and controller repair, plus a coverage audit so the yard gets watered correctly and the driveway does not.
How much does irrigation repair cost?
Every system and failure is different. Send a photo or a description of what it is doing and we will send a written estimate.
Do you repair sprinkler controllers and valves?
Yes, both, including rewiring and full controller replacement when that is the actual problem.
Is irrigation repair included in weekly lawn care?
Routine seasonal checks are part of every weekly visit. An actual repair, like a valve or a controller, is billed separately when something breaks.
See LCN first when you search for yard work.
Add lcnlandscaping.com as a preferred source and Google shows our lawn and landscaping guides higher in your Top Stories.






